PROGRAMMING INSTRUCTIONS
ENTER SECURITY CODE
•Press SECURITY CODE.
•Enter your assigned security code.
•Press ENTER.
Note: Security code is required to use keypad. If more than 30
seconds elapses between keystrokes when using the keypad, you
must re-enter your security code.
PROGRAMMING
•Press AWARD TONE once to turn on, then a second time to turn off
(red LED indicates on or off).
•Press SET DELAY, then enter time you wish to delay before
starting to count (0-59 seconds). Press ENTER.
•Press SET SYSTEM STOP TIME, then enter the time when your
store closes using 24 hour time (i.e. 11:00 PM = 23:00), or enter
24:00 to disable. Press ENTER. Timing will resume at daypart 1.
•Press SET 24 HOUR TIME, then enter the time of day using 24
hour time. Press ENTER.
•Press SET MONTH DAY YEAR S.O.W. (Start Of Week). For
MONTH, enter 1-12 to indicate current month, and then press
ENTER. For DAY, first enter day of month (1-31) and press
ENTER, and then enter day of week (1-7) and press ENTER. For
YEAR, enter year and press ENTER. For S.O.W., enter number of
day of week on which you start business (Sunday=1, Saturday=7),
and press ENTER.
•Press SET MINIMUM GOAL TIME to change (otherwise, default
time is 2:30), then enter time until first alert tone sounds, and press
ENTER.
•Press SET MAXIMUM GOAL TIME to change (otherwise, default
time is 3:30), then enter time until second alert tone sounds, and
press ENTER.
•Press SET MINIMUM GOAL TONE to change tone duration
(otherwise, default duration is 3 seconds), then enter number of
seconds tone will sound, and press ENTER.
•Press SET MAXIMUM GOAL TONE to change tone duration
(otherwise, default duration is 3 seconds), then enter number of
seconds tone will sound, and press ENTER.
•Press INDIVIDUAL CAR PRINT once to turn on, then a second
time to turn off (red LED indicates on or off).
SETTING OTHER PROGRAM FUNCTIONS
•Press ALERT TONE until desired LED is lit for HIGH, or LOW, or
no light for OFF.
•Press MODEM to activate. It should not be activated unless the
modem or computer download function is to be used. This
temporarily disables the timing functions.
•Refer to manual for demand print and display functions.
